Xerox Legacy 4112, User Manual

Page: 39 / 140

X e r o x 4 11 2 / 4 1 2 7 P o s t S c r i p t U s e r G u i d e
2-11
2 . W i n d o w s M e
Booklet Subsets Specify the number of sheets in each subset when printing booklet
in subsets. Select from "None," or "Every Sheet" to "Every "20
Sheets."
Skip Blank Pages Specify whether to skip blank pages when printing documents that
consist of blank pages.
Bypass Feed Orientation Specifies the paper orientation when printing from the bypass tray.
When feeding the short edge of the paper first, select
[Landscape]. When feeding the long edge of the paper, select
[Portrait].
Print Mode Specifies whether to give priority to the print speed or the image
quality.
Halftone Select the halftone settings for printing.
• Select [Fine Dots] for the small size halftone dot commonly
used in PostScript.
• Select [Thick Dots] for coarser dots than the Fine Dots setting.
• Select [Type 3] for the same halftone setting that is used in
PCL.
Image Enhancement Specifies whether or not to use the Image Enhancement function.
Selecting [On] smooths out boundaries when printing. This
reduces jagged edges by artificially increasing the resolution of
the image. When printing a bitmapped image composed of coarse
halftone dots, smooth color or grayscale gradation is impossible in
certain situations. In this case, select [Off].
Draft Mode Specifies whether or not to reduce the amount of toner used when
printing drafts. When [On] is selected, the overall print becomes
lighter. This is best for printing documents when high print quality
is not necessary.
Custom Paper Auto
Orientation
Specifies whether or not to correct the orientation of the custom
paper.