Xerox FaxCentre F110, Service Manual

Page: 124 / 204

General Procedures / Information
6-38 12/04 FaxCentre F110
GP 11 Firmware Upgrading with PC Kit V1.1 (Windows 2000 / XP)
To launch the utility:
• Command line : TelUSB2 [Full path of the binary file to upload]
• Double click on the TelUSB2.exe icon
• Double click on the binary file to upload (.bin files need to previously be associated with
TelUSB2.exe in Windows Explorer).
TelUSB2 always gives the current state of the device. The utility is registered to the system to be
notified when the device is plugged or unplugged or when the mode of the device changes. You
do not need to restart the utility after plugging or after switching mode.
States:
• No USB MFL/C5 device detected
Device is not switched on or USB cable is not plugged in.
• MFL/C5 in standard mode. Switch to upload mode.
Device is in normal mode. You need to switch for upload mode before proceed.
• MFL/C5 ready for upload.
Device is ready to proceed.
If TelUSB2 is launched by specifying a file name as command line parameter or by double clicking
on a binary file, the utility will automatically try to upload the file. Then, if the file is successfully
uploaded, the utility will be automatically closed. If upload failed (device not plugged or not ready)
you can retry by clicking the upload button.
To select a binary file to be uploaded:
• You can specify its full path in command line parameter (automatic upload mode).
• You can double-click on a binary file (.bin file needs to be previously associated with
TelUSB2.exe in Windows Explorer) (automatic upload mode).
• You can drag and drop a file from the Explorer to the TelUSB2 utility.
• You can use the “Browse” button.
• You can directly write the full path of the file in the edit filed.