Solving PostScript Problems
Chapter 5: Troubleshooting
❖
5-17
Solving PostScript Problems
Table 5.3 contains problems that may occur with
PostScript printing (available only if the PostScript option
is installed).
Table 5.3
PostScript Problems
Problem
Possible Cause
Remedy
PostScript file can not
be printed.
The PostScript option may
not be installed, or the
installed memory may be
insufficient.
Print a configuration sheet and verify that
the PS version is available for printing, and
that total system memory is at least 12 MB.
If PostScript is not available, install the
PostScript option. See
If system memory is not at least 12 MB,
install the 8 MB SIMM provided with the
PostScript option.
Error messages are
printed (i.e., “This job
contains binary
data...”)
The pure binary data
option is not supported by
the PostScript driver.
Open the
Properties
tab of the PostScript
printer driver, click on
PostScript
, and click
on the
Advanced
button. The pure binary
data option is not supported. Choose
another.
The printer name does
not appear in the
Chooser (Macintosh
only)
The LocalTalk connection is
not secure.
Make sure that the printer is powered on.
Check that the LocalTalk cable is completely
plugged into the printer and your
Macintosh.
The optional Tray 2 is
not selected in the
driver.
The printer driver has not
been configured to
recognize the optional tray.
Open the PS driver Properties and set ‘Paper
Tray 2’ item of Device option to
Installed
.
Summary of Contents for DocuPrint P14
