Xerox DocuPrint N2025, System Administrator Manual

Page: 44 / 256

Using the Menu System
1-28
❖
System Administrator Guide
Tray N Mode
Determine whether or not to use
Tray
N ’s auto size detection
mechanism or Custom Size
settings. The available values are:
Auto*
Custom
1. Press Menu Up or Menu Down
until you see:
M e n u s
T r a y M e n u
2. Press Item Up or Item Down until
you see:
T r a y M e n u
T r a y
N
M o d e
3. Press Value Up or Value Down until
you see:
T r a y
N
M o d e =
New Value
4. Press Enter . You will see:
T r a y M e n u
T r a y
N
M o d e
5. Press On Line . You will see:
R e a d y
Config Fuser
Enable the setting of fuser
temperatures associated with
each paper type (otherwise set
automatically by the printer).
The available values are:
On
Off*
When set to On , paper types are
available as menu items (see the
following items in this table).
1. Press Menu Up or Menu Down
until you see:
Menus
Tray Menu
2. Press Item Up or Item Down until
you see:
Tray Menu
Config Fuser
3. Press Value Up or Value Down until
you see:
Config Fuser =
New Value
4. Press Enter . You will see:
Tray Menu
Config Fuser
5. Press Online . You will see:
Ready
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function Keystrokes Display Reads
Table 1.11 Page 5 of 10