Xerox DocuPrint N2025, System Administrator Manual

Page: 191 / 256

Control Panel Messages
Chapter 5: Troubleshooting
❖
5-13
Ready
The printer is online and ready to print.
Remove Output
From Offset Bin
The Offset Bin (Offset Catch Tray) is full. Empty the bin to resume printing.
Remove Output
From Std. Bin
The Standard Bin is full. Empty the bin to resume printing.
Remove PrintCart
Clear Paper Path
Part of a sequence of messages following an initial paper jam message.
Remove the laser print cartridge and any jammed paper, close the covers,
then refer back to the Control Panel for further messages.
Toner Low
The toner in the laser print cartridge is low. The printer will continue to
print, but over time print quality will deteriorate. Replace the laser printer
cartridge.
Tray 1 Jam-
Open Tray 1
A paper jam has occurred at or before the input sensor when feeding
paper from Tray 1. Remove Tray 1 from the printer, then refer back to the
Control Panel for further messages.
Tray 2 Failure
Power Off/On
Tray 2 when installed with a 500 sheet feeder or when installed with a
2000 sheet feeder has failed. Power off and power on the printer. If the
problem persists, contact your Customer Service Center.
Tray 2 Jam-
Open Tray 2
A paper jam has occurred at or before the input sensor when feeding
paper from Tray 2.
• If Tray 2 is a 500 sheet feeder, remove Tray 2 from the printer.
• If Tray 2 is a 2,000 sheet feeder, open the feeder’s paper tray
Then refer back to the Control Panel for further messages.
Table 5.1 Control Panel Messages (continued)
Message Explanation/Corrective Action
Table 5.1 Page 9 of 10