Xerox DocuPrint N2025, System Administrator Manual

Page: 42 / 256

Using the Menu System
1-26
❖
System Administrator Guide
Tray Sequence
Set the sequence of trays used by
the printer when tray switching is
required. The available values are:
MBF-1 1-MBF
MBF-2 1-2
MBF-3 1-2-3
MBF-1-2 2-1
MBF-1-2-3 2-3
MBF-2-1 3-1
MBF-2-3 3-1-2
MBF-3-1 Off
MBF-3-1-2
Values in italics are available only with
optional tray(s) installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
See the section
“Configuring
Automatic Tray Switching”
(page 1-112) for rules and
examples of usage.
1. Press Menu Up or Menu Down
until you see:
M e n u s
T r a y M e n u
2. Press Item Up or Item Down until
you see:
T r a y M e n u
T r a y S e q u e n c e
3. Press Value Up or Value Down until
you see:
T r a y S e q u e n c e =
New Value
4. Press Enter . You will see:
T r a y M e n u
T r a y S e q u e n c e
5. Press On Line . You will see:
R e a d y
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function Keystrokes Display Reads
Table 1.11 Page 3 of 10