Xerox DocuPrint N2025, System Administrator Manual

Page: 186 / 256

Control Panel Messages
5-8
❖
System Administrator Guide
Insert Tray 2
The printer cannot feed from Tray 2 because the tray is open or removed.
Reinstall/insert the tray to resume printing.
Insert Tray 3
The printer cannot feed from Tray 3 because the tray is open or removed.
Reinstall/insert the tray to resume printing.
Install
Print Cartridge
The laser print cartridge is missing or is not installed correctly. Install the
laser print cartridge according to the directions for
“Replacing the Laser
Print Cartridge” (page 4-3).
IOT NVM Fail
Power Off/On
The NVM (Non Volatile Memory) has failed on the IOT (Image Output
Terminal) which is also called the print engine. Printing cannot resume.
Menu operations may have to be halted if this error occurs. Power off and
power on the printer. If the problem persists, contact your Customer
Service Center.
Laser Failure
Power Off/On
The laser assembly has failed. Power off and power on the printer. If the
problem persists, contact your Customer Service Center.
Lift/Extend MBF
Part of a sequence of messages following an initial paper jam message. Lift
up and pull out the multi bypass feeder tray, then refer back to the Control
Panel for further messages.
Lift/Extend MBF
Open Top Cover
Part of a sequence of messages following an initial paper jam message. Lift
up and pull out the multi bypass feeder tray and open the printer’s top
cover, then refer back to the Control Panel for further messages.
Table 5.1 Control Panel Messages (continued)
Message Explanation/Corrective Action
Table 5.1 Page 4 of 10