![background image](http://html.mh-extra.com/html/xerox/docuprint-c55/docuprint-c55_service-manual_883399160.webp)
PARTS LIST SECTION
2/99
INTRODUCTION
5-2
DocuPrint C55/C55mp/[NC60]
OVERVIEW
The Parts List section identifies all part
numbers and the corresponding location of all
spared subsystem components.
ORGANIZATION
PARTS LISTS
Each item number in the part number listing
corresponds to an item number in the related
illustration. All the parts in a given subsystem
of the machine will be located in the same
illustration or in a series of associated
illustrations.
ELECTRICAL CONNECTORS AND
FASTENERS
This section contains the illustrations and
descriptions of the plugs, jacks, and fasteners
used in the machine. A part number listing of
the connectors is included.
COMMON HARDWARE
The common hardware is listed in alphabetical
order by
the letter or letters used to identify
each item in the part number listing and in the
illustrations. Dimensions are in millimeters
unless otherwise identified.
PART NUMBER INDEX
This index lists all the spared parts in the
machine in numerical order. Each number is
followed by a reference to the parts list on
which the part may be found.
OTHER INFORMATION
ABBREVIATIONS
Abbreviations are used in the parts lists and
the exploded view illustrations to provide
information in a limited amount of space. The
following abbreviations are used in this
manual:
C
Cyan
DC
Direct Current
ESS
Electronic Sub-system
HVPS
High Voltage Power Supply
HZ
Hertz
IF
Interface
K
Black
LVPS
Low Voltage Power Supply
M
Magenta
MB
MegaByte
MM
Millimeter
PCL
Printer Control Language
P/0
Part Of
PS
PostScript
PWB
Printed Wiring Board
REF
Reference
SLIC
Serial Local Interface Card
SIMM
Single Inline Memory Module
T
Teeth
TD
Transfer Drum
Y
Yellow
SYMBOLOGY
Symbology used in the Parts List section is
identified in the Symbology section.
SUBSYSTEM INFORMATION
USE OF THE TERM "ASSEMBLY"
The term "assembly" will be used for items in
the part number listing that include other
itemized parts in the part number listing.
When the word "assembly" is found in the part
number listing, there will be a corresponding
item number on the illustrations followed by a
bracket and a listing of the contents of the
assembly.
BRACKETS
A
bracket is used when an assembly or kit is
spared, but is not shown in the illustration.
The item number of the assembly or kit
precedes the bracket; the item numbers of the
piece parts follow the bracket.
Tag
The notation "W/Tag" in the parts description
indicates that the part configuration has been
updated. Check the Change Tag Index in the
General Information section of the Service
Data for the name and purpose of the
modification.
In some cases, a part or assembly may be
spared in two versions: with the Tag and
without the Tag. In those cases, use
whichever part is appropriate for the
configuration of the machine on which the part
is to be installed. If
the machine does not
have a particular Tag and the only
replacement part available is listed as
"W/Tag," install the Tag kit or all of the piece
parts. The Change Tag Index tells you which
kit or piece parts you need.
Whenever you install a Tag kit or all the piece
parts that make up a Tag, mark the
appropriate number on the Tag matrix.
Summary of Contents for DocuPrint C55
