![background image](http://html.mh-extra.com/html/xerox/docuprint-c55/docuprint-c55_service-manual_883399154.webp)
REPAIRS/ADJUSTMENTS
2/99
ADJ 6.1
4-66
DocuPrint C55/C55mp/[NC60]
ADJ 6.1 MAGNETIC ROLLER
CLEANER CAMS
PURPOSE
The purpose of this adjustment is to ensure that
the Magnetic Roller Cleaner Cams raise the
Cleaner Blades when the Magnetic Roller
Solenoid is energized and lower the Cleaner
Blades when the solenoid is deenergized.
CHECK
Switch the power off. Open the printer and
remove the Print Drum, Color Developer Module,
and Black Developer Module. Observe the four
(Y, M, C, K) Magnetic Roller Cams (Figure 1).
The M, C, and K cam lobes should be in the
same radial position as the Y cam lobe. If they
are not the same, perform the adjustment.
Figure 1. Checking the Shafts
ADJUSTMENT
1. Remove the Outer Drive Frame (REP 4.8
steps 1, 2, and 3)
2. (Figure 2): Remove the three idler gears.
3. Rotate the M, C, and K cams until they are
aligned with the Y Cam.
4. Reinstall the three idler gears.
5. Perform the ADJ 4.1 check.
Figure 2. Aligning the Cams
K2
K8
Y
M
C
K
Idler
Gears
Y
M
C K
Summary of Contents for DocuPrint C55
