213
overloading. The load number is 4. The termination on a
loop may consist of any combination of devices subject
only to the requirement that the total load numbers of all the
devices does not exceed 100.
Standard Connecting Arrangement: CA11A
European certification
(230 V, 50 Hz system typically)
CE marking
The CE marking applied to this product symbolizes Rank
Xerox declaration of conformity with the following
applicable directives of the European Union as of the dates
indicated.
January 1, 1995—Council Directive 73/23/EEC amended
by Council Directive 93/68/EEC, approximation of the
Laws of the Member States related to low voltage
equipment.
January 1, 1996—Council Directive 89/336/EEC,
approximation of the Laws of the Member States related to
electromagnetic compatibility.
A full declaration, defining the relevant Directives and
referenced standards can be obtained from your Rank
Xerox representative.
Safety/quality standards
The WorkCentre 450c is certified by Nemko, Norway to
IEC950. The equipment is manufactured under a BS5750
Quality system accepted by the British Standards
Institution.
