Troubleshooting
7
7.1 When Problems Occur
111
Cannot print.
Is the Data Processing LED off?
Is there any message being
shown on the display?
When the printer and the host
device are connected by a
parallel interface cable, the host
device is not responding to
bidirectional communication.
The printer is in the pause state or
the menu setting state. Treat
accordingly as follows:
• "Pause"
Press
to release the
pause state.
• Others
Press
to release the
menu setting state.
"1.3.2 Control panel"
Treat according to the message
displayed.
"7.2 Messages"
By default, the birectional
communication setting of the
printer is set to ON. If the host
device is not responding to
bidirectional communication,
printing cannot be done. In this
case, turn the bidirectional
communication setting to OFF
from the printer control panel and
then print again.
"5.3 Common Menu Items"
Data
Processing
Processing
Error
Condition
Cause
Treatment
Summary of Contents for Document centre 250 series
