Xerox Document centre 250 series User Manual Download Page 19

Page: 19 / 185

Overview of the Printer

1.3 Main Components and Their Functions

1.3.2

Control panel

Parts

The control panel consists of the LED, Display and the keys.

LED Display Keys

LED

LED indicates printer state by turning on, blinking and turning off light.

Data Processing

Print Processing

Error

LED stands for Light Emitting Diode.

Data Processing

Indicates the state of data processing by green light.

• Light on

Ready to receive data.

• Blink

Receiving data.

• Light off

Unable to receive data.

When data cannot be received, it could be due to instances when you have accessed the
Common menu by pressing

or the Pause Mode by

"Chapter 5 Mode Menu/Common Menu" for details on the menu operations. Also, for
information on the Pause Mode, refer to "3.2.3 Cancelling all jobs in the printer" and
"3.3.2 Outputting all jobs in the printer".

Summary of Contents for Document centre 250 series


























































































































































































Search results

Summary of Contents for Document centre 250 series

Reviews:

Related manuals for Document centre 250 series

Brands by name

Popular brands

Xerox Document centre 250 series, User Manual

Search results

Summary of Contents for Document centre 250 series

Reviews:

Related manuals for Document centre 250 series

Brands by name

Popular brands