Xerox document centre 235 series User Manual Download Page 67

Page: 67 / 209

3.6 Printing Data Combined Using Overlays

Useful Operations

Printing with an overlay

The procedure to print your data with the overlay is as follows:

Procedure

Using the application program, create the data for the form.

From the File menu, select Print.

Check that this printer is selected at the Name list box, and then click Properties. The printer
properties dialog box appears.

Click the Overlays tab.

Select the overlay (e.g. "Form1") to be used from Overlays.

Click OK to close the printer properties dialog box. Then click OK to close the Print dialog box.
The data will be printed with the overlay.

Summary of Contents for document centre 235 series


















































































































































































































Search results

Summary of Contents for document centre 235 series

Reviews:

Brands by name

Popular brands

Xerox document centre 235 series, User Manual

Search results

Summary of Contents for document centre 235 series

Reviews:

Brands by name

Popular brands