Xerox document centre 235 series, User Manual

Page: 30 / 209

S
e
tting Up
18
2
2.2
Connecting Cable
This section describes connecting by cable, to the interface of the environment to be used.
Remember to switch off the power supply during installation to prevent electric shock.
You cannot use the optional Token Ring interface together with Ethernet interface.
2.2.1 Connecting by parallel interface
The following procedure explains how to connect by the parallel interface.
To connect by the parallel interface, you will need the parallel interface cable provided by our company as
an optional product. For details, consult our Customer Support Center.
Procedure
Insert the interface cable connector to the
parallel interface connector and secure it by the
wire clips on both sides.
Connect the other end of the interface cable
connector to the computer.
Switch on the printer.
If necessary, set the following items on the printer control panel (Network/Port > Parallel):
"5.3 Common Menu Items" for details on the individual item and the setting method.
For normal use, there is no need to change the factory settings of all the items.
●
Print Mode
● PJL
● Adobe Protocol
● Auto Eject Time
●
Bi-directional
(Factory setting: Auto)
(Factory setting: Enable)
(Factory setting: Normal)
(Factory setting: 30 Secs)
(Factory setting: Enable)