TOOLS MODE
3–6
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
1
2
3
4
5
6
7
3
Review the current settings for each tray. Use the
up and down arrows to highlight the desired paper
tray and touch the Change Settings button to
display the detail screen for the tray. A sample
detail screen for Trays 2, 3, and 4 is illustrated in
Figure 8.
NOTE:
•
You can not run heavyweight paper from
Paper Tray 1. The only option on the Tray 1
detail screen is Normal.
•
The Auto Tray Setup - Switching option, set
through Auto Paper Select, must be disabled
before you can select the Heavyweight option
for Trays 2, 3, or 4.
4
Touch the button for the setting that best
describes the paper type for the tray.
5
Touch Save to display the Paper Type screen.
6
If necessary, repeat steps 3 through 5 for another
paper tray.
7
Touch Close to display the Tray Management
screen.
8
Touch Close to display the Tools screen.
Figure 8: Sample Tray detail screen
