DocuColor 5252 System Administration Guide
2-48
Tools Mode
7
Use the up or down arrow buttons to enter the amount of
adjustment for either edge or both edges.
Key point 1:
Remember that the Lead Edge Registration
adjustment is the feeding edge, or Y direction. The Side Edge
Registration adjustment is the front to back, or X, direction.
Key point 2:
If the reference point on side two is closer to the
edge of the paper compared to the reference point on side one,
enter a plus figure. If the reference point on side two is further from
the edge of the paper compared to side one, enter a minus figure.
Key point 3:
EXAMPLE: If the measurement is 1.2mm closer to
the edge of the paper, enter +1.2mm.
8
If you selected the
Oversize Paper Offset
button to adjust the
registration on paper larger than 8.5x11 inch or A4 LEF, the
following screen appears.
Summary of Contents for DocuColor 5252
