Xerox DocuColor 5252, System Administration Manual

Page: 9 / 140

1
In
tr
o
duc
tion
DocuColor 5252 System Administration Guide
1-3
Introduction
Electrical safety
This Xerox digital press and the recommended supplies have
been designed and tested to meet strict safety requirements.
Attention to the following notes will ensure the continued safe
operation of your digital press.
• Use only the power cord supplied with this equipment.
• Plug the power cord directly into a correctly grounded
electrical outlet. Do not use an extension cord. If you do not
know whether or not an outlet is grounded, consult a qualified
electrician.
• Do not use a ground adapter plug to connect this equipment to
an electrical outlet that lacks a ground connection terminal.
Warning: You may get a severe electrical shock if the outlet is
not correctly grounded.
• Do not place the press where people may step on or trip on
the power cord. Do not place objects on the power cord.
• Do not override or disable electrical or mechanical interlocks.
• Do not obstruct the ventilation openings. These openings are
provided to prevent overheating of the machine.
Warning: Never push objects of any kind into slots or openings
on this equipment. Making a contact with a voltage point or
shorting out a part could result in fire or electrical shock.
• If any of the following conditions occur, immediately switch off
the power to the machine and disconnect the power cord from
the electrical outlet. Call an authorized Xerox service
representative to correct the problem.
– The machine emits unusual noises or odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device
has been tripped.
– Liquid is spilled into the press.
– The machine is exposed to water.
– Any part of the machine is damaged.