Xerox DocuColor 5252, Operator'S Manual

Page: 285 / 348

DocuColor 5252 Operator Manual
7-9
Problem solving
7 Pro
b
le
m
so
lv
in
g
Problem Suggested Solution
The copies are blurred when copying
thick documents, three-dimensional
objects, or books. • Increase the Sharpness.
• Select the Text or Maps option in the Original Type feature.
• Ensure that the document is held flat on the Document Glass
and that the document cover is closed as much as possible.
DO NOT force the cover closed.
The image quality gradually degrades
on successive copies, or copies made
with settings used previously are
significantly worse than copies you
are making now. • The internal process control function of the digital press with
scanner has degraded.
• Place a white sheet of paper on the Document Glass and run
35 blank copies using Full Color in the Color Mode feature.
Make a copy of the document again. Ensure that the image
quality selections are set properly.
• If the problem persists, contact your System Administrator.
Copies have dark bands on the lead
edge and a corner when 100%
Reduce/Enlarge is selected. • The bands may be caused by curled edges on the document
or by misregistration of the document on the Document Glass.
Ensure that the document is registered correctly.
• Ensure that the Edge Erase is at No Erase (2 mm). Increasing
the amount of Edge Erase should remove more of the dark
bands but could cause image loss.
Copies have dark bands on the lead
edge and a corner when 100%
Reduce/Enlarge is selected and the
DADF is used. The bands may be caused by curled edges on the document or by
misregistration of the document by the DADF. Ensure that the
Edge Erase is at No Erase (2 mm). Increasing the amount of
Edge Erase should remove more of the dark bands but could
cause image loss.