Xerox DocuColor 5252, Operator'S Manual

Page: 245 / 348

DocuColor 5252 Operator Manual
6-19
Accessories
6
A
cce
ss
o
ries
Control Panel
Figure 6-13
1
2
3
4
5
6
7
8
9
Name Function
1 Ready light The Ready light blinks during initialization and is constant when the EHCS is in use
or in standby mode.
2 Sample set
button Press to have the EHCS deliver the next collated set to the top tray.
3 Unload
button Press once to lower the Stacker Tray and unlock the front door. If pressed while
running a job, all sheets in the paper path are delivered before the Stacker Tray
starts to lower.
4 Unload light Illuminates when the Stacker Tray has reached the down position and the front door
can be opened.
5 Wait light Blinks when the Stacker Tray is moving up or down.
6 Fault code
display Refer to the fault code table later in this section.
7 Top tray jam
area Blinks when there is a jam.
8 Bypass jam
area Blinks when there is a jam.
9 Stacker tray
jam area Blinks when there is a jam or the door is open.
Keypad Used by the service representative for diagnostics (not shown). The keypad is
located on the front right of the control panel.