Xerox DocuColor 5252, Operator'S Manual

Page: 204 / 348

DocuColor 5252 O perator Manual
5-96
Scanner
Transparency Options
Transparency Options allows you to do the following:
• Transparency Set produces a single set of transparencies
with a designated number of sets of paper output. Only one set
of transparencies is produced regardless of the number of
paper sets requested.
• Transparency Set + Dividers produces a single set of
transpar dividers with a designated number of sets of
paper output. Only one set of transparencies is produced
regardless of the number of paper sets required.
• Dividers Only produces a continuous stream of dividers to be
incorporated into a job programmed for transparencies only.
This is the option to choose if you are running multiple sets of
transparencies and require a divider to be inserted between
each set.
Off is the permanent default for Transparency Options. The default
cannot be changed in Tools Mode.
Tray 3 is automatically selected when Transparency Options is
selected. Transparencies should be run from Tray 3 ONLY. Any
other tray may be selected for Dividers. If Transparency Options is
selected and paper is in Tray 3, a message appears in the
message area on the Touch Screen indicating that transparencies
must be loaded into Tray 3.
Collated must be selected on the
Basic Features screen for the
Transparency Options button to appear. The Transparency
Options feature cannot be used in combination with the Covers,
Inserts, Booklet Creation, or Poster features.