Xerox DocuColor 5252, Operator'S Manual

Page: 114 / 348

DocuColor 5252 O perator Manual
5-6
Scanner
If the input document is slightly smaller or larger than a standard
size document, the DADF may detect it as a standard size
document. Dark areas or image loss along the edges may occur.
Enter the document size by using the Original Size feature or the
Edge Erase feature in the
Added Features tab.
The following document types cause document jams or
malfunction of the DADF. Make copies of these documents by
placing them directly on the Document Glass.
• Book, pamphlet, and booklet documents
• Broken, creased, or paste-up documents
• Documents with clips and staples
• Transparent documents (the document size cannot be
detected automatically or the DADF belt is copied)
• Documents with black carbon
• Documents smaller than A5 size (8.5 x 5.5 inches)
• Paper weight heavier than 32 pound (128 g/m
2
)
• Coated paper
Key point: If you are using the DADF to scan more than 50
originals, you can use the Additional Originals option to scan the
entire stack of originals as one scan to print job. The Additional
Originals feature must be enabled in Tools Mode. Refer to the
System Administration Guide for information on how to enable this
feature (see page 2-52).