manualshive.com logo in svg

Xerox 3635MFP - Phaser B/W Laser, User Manual

The Xerox 3635MFP - Phaser B/W Laser is a high-performing multifunction printer designed with efficiency in mind. For easy setup and maintenance, make sure to download the free User Manual from our website. With step-by-step instructions and helpful tips, you can unleash the full potential of this exceptional product.

Share
Download
background image

1

Welcome 

Xerox Phaser 3635 User Guide

11

This product has been manufactured under a registered ISO9001 Quality system.

CE Mark 

The CE mark applied to this product, symbolizes XEROX's declaration of 
conformity with the following applicable European Union Directives, as of the 
dates indicated:

December 12, 2006: 

Council Directive 2006/95/EC as amended. Approximation of the laws of the 
member states related to low voltage equipment.

December 15, 2004: 

Council Directive 2004/108/EC as amended. Approximation of the laws of the 
member states related to electromagnetic compatibility.

March 9, 1999

Council Directive 99/5/EC, on radio equipment and telecommunications 
terminal equipment and the mutual recognition of the conformity. 

A full declaration of conformity, defining the relevant directives and referenced 
standards, can be obtained from your XEROX Limited representative.

WARNING: 

In order to allow this equipment to operate in proximity to 

Industrial Scientific and Medical (ISM) equipment, the external radiation from 
the ISM equipment may have to be limited or special mitigation measures 
taken.

NOTE: 

Changes or modifications to this equipment not specifically approved by 

the Xerox Corporation may void the user’s authority to operate this equipment.

WARNING: 

Shielded cables must be used with this equipment to maintain 

compliance with Council Directive 2004/108/EC.

EMC Information

FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with 
the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interferences at 
their own expense.

Summary of Contents for 3635MFP - Phaser B/W Laser





































































































































































































































Reviews:

No comments

Related manuals for 3635MFP - Phaser B/W Laser

Canon MX490 Series Setup Manual preview
MX490 Series
Brand: Canon Pages: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Brand: Canon Pages: 2
Canon Photura 135 Review preview
Photura 135
Brand: Canon Pages: 12
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Brand: Canon Pages: 4
Oki C5800 Brochure & Specs preview
C5800
Brand: Oki Pages: 6
Oki C7300 Référence Matérielle preview
C7300
Brand: Oki Pages: 44
Oki C7500 Enhancements Manual preview
C7500
Brand: Oki Pages: 13
Oki C7300 Software Installation Manual preview
C7300
Brand: Oki Pages: 20
Oki C7300 Specifications preview
C7300
Brand: Oki Pages: 2
Oki C5300 Setup Manual preview
C5300
Brand: Oki Pages: 28
QMS Magicolor 2 Desklaser Install Manual preview
Magicolor 2 Desklaser
Brand: QMS Pages: 60
Xante Accel-a-Writer 8300 Maintenance And Specifications preview
Accel-a-Writer 8300
Brand: Xante Pages: 12
Xerox 3635MFP - Phaser B/W Laser Evaluator Manual preview
3635MFP - Phaser B/W Laser
Brand: Xerox Pages: 16
Magicard Rio Pro Maintenance Manual preview
Rio Pro
Brand: Magicard Pages: 108
Oki F0305 User Manual preview
F0305
Brand: Oki Pages: 188
Printekmobile MLP-35 Quick Start Manual preview
MLP-35
Brand: Printekmobile Pages: 2
Konica Minolta IC-203 User Manual preview
IC-203
Brand: Konica Minolta Pages: 432
Thermotron BC41M Quick Start Manual preview
BC41M
Brand: Thermotron Pages: 10

Brands by name

Popular brands

Load more brands