Xerox 3635MFP - Phaser B/W Laser, System Administration Manual, Page: 70 / 212

5 Network Scanning
58 Xerox Phaser 3635 System Administration Guide
16. Click on the [Apply] button to accept the changes.
If prompted, enter the Administrator’s User ID [admin] and Password [1111] , and
click on [Login] .
17. Continue to Optional Step: Configure General Settings – page 63.
Server Message Block (SMB)
Information Checklist
Before starting the Installation procedure, please ensure that the following items are
available and/or the tasks have been performed:
1. Create a shared folder to be used as a Network Scanning location (Repository) for
scanned documents.
Write down the Share Name of the folder and the Computer Name.
2.
Create a User account and password
for the machine with full access rights to the
scan directory.
Write down the User Account and Password details .
3. Test your settings by logging in to the scan directory from a PC with the User
account and password:
a) Create a new folder within the directory.
b) Delete the folder.
NOTE: If you cannot do the steps above, check the access rights for the User account.
Procedure
1. At your Workstation, open the web browser, enter the TCP/IP Address of the machine
in the Address bar.
2. Press
[Enter]
.
3. Click on the
[Properties]
tab.
4. Click on the
[Services]
link.
5. Click on the
[Network Scanning]
link.
6. Click on the
[File Repository Setup]
link.
7. Click on the [Add] button in the [Default File Destination] area.
NOTE: If the Default File Destination has previously been configured, click on [Edit] .
8. Optional Step: Enter a name to describe the Filing Destination in the [Friendly
Name] entry box.
9. Select [SMB] from the [Protocol] drop-down menu.
10. Click on [IP Address] or [Host Name] , enter either the
IP Address
or
Host Name
of
the computer where the Scan Filing Repository (SMB Server / Workstation) is located.
11. Enter the Port Number , if required (Default is 139).