Xerox 3635MFP - Phaser B/W Laser, System Administration Manual

Page: 19 / 212

Connection Ports
Xerox Phaser 3635 System Administration Guide 7
Rear
Phone Line Port
This port is used to connect the machine directly to the fax line.
EXT Port
This port is used to allow a handset to be connected to the machine.
USB 2.0 Port
This port is used to allow direct printing and for Diagnostic purposes by the Service Engineer.
Ethernet Port - 10 Mbps/100 Mbps
The machine is compatible with SMB, LPD, AppleTalk, NetWare, IPP, HTTP, DHCP, LDAP,
SNMP, DDNS and Port9100. It supports an Ethernet connector as a standard feature.
There are five Ethernet interface options available on the touch screen: Auto, 100 Mbps Full-
Duplex, 100 Mbps Half-Duplex, 10 Mbps Full-Duplex, and 10 Mbps Half-Duplex. When
[Auto] is selected, the machine detects the communication speed automatically when
powered on and adjusts its settings accordingly.
AppleTalk, NetWare and TCP/IP protocols that use Ethernet can be switched automatically
according to the applied transmission protocol.
Card Reader for Feature Enablement Key
The Feature Enablement Key allows certain features or services, such as fax, to be fully
installed.
Foreign Device Interface (FDI) Port
This port allows a third party FDI device to be attached to the machine. FDIs are access and
accounting devices, such as counters, card readers or coin-operated devices.
Initial Connection
Follow these steps to physically connect your machine to the network:
1.
Connect the Power Cable
Ensure that the machine is connected to a suitable power supply and that the power
cord is fully plugged into the electrical outlet.
2. Connect the Ethernet Cable
Connect a 10/100 BaseT Ethernet cable to the Ethernet port at the rear of the
machine and the other end of the cable to your network port.
3. Power on the machine
The Power On button is located at the rear of the machine.
4. Complete the Steps shown by the Installation Wizard
If this is the first time the machine has been powered on, the Installation Wizard will
run.