Xerox 2101, Configuration Manual

Page: 23 / 192

1
1-11 Connecting network cable to the Fiery EX2101
Ethernet connection
For Ethernet connections, the Fiery EX2101 supports Unshielded Twisted Pair (UTP)
cabling, defined as Category 5 for use with 100BaseT, or as Category 3, Category 4, or
Category 5 for use with 10BaseT. The cable uses an 8-pin RJ-45 connector that plugs
into the RJ-45 socket on the Fiery EX2101.
N
OTE
:
The 100BaseT type supported by the Fiery EX2101 is100BaseTX, also known
as Fast Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
“100BaseT” is used to refer to 100BaseTX.
T
O CONNECT TO THE
E
THERNET BOARD
• Connect the network cable to the RJ-45 connector on the back of the Fiery EX2101.
You must use a Category 5 unshielded twisted pair network cable for 100BaseT and
1000BaseT.