Xerox 2101, Configuration Manual

Page: 37 / 192

2
2-13 Fiery EX2101 on a NetWare network
In order to set up the NetWare server in bindery emulation mode for printing to the
Fiery EX2101, the network administrator must do the following:
• Determine the Directory Services path to the container in which the print server and
the Fiery EX2101 Print queue will be created.
The container defines the “bindery context” for your network structure.
• Edit the bindery context.
• Activate the new bindery context.
Setting up a NetWare Print queue for bindery
For NetWare in bindery emulation mode, the NetWare print server and the
Fiery EX2101 Print queue must be created and configured.
As with NDS, you can create several NetWare entities on a Novell server, and you can
then select them in Network Setup (see
“PServer Setup options” on page 4-22).
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
“Network Setup options” on page 4-13), and verify that the settings reflect the entities
you created in the NetWare administrator utilities (see “Configuring a NetWare server
for printing” on page 2-10).
N
OTE
:
For printing to the Fiery EX2101, connect all Windows clients to a NetWare
server and permit them to connect to the Print queues for the Fiery EX2101.
After the Novell server and the Fiery EX2101 have been set up, client Setup
consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 98/Me workstations, load both the IPX/SPX-compatible protocol and
the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP workstations, install Client Services for NetWare.
Use the CSNW option in the Control Panel to set printing options and specify a
preferred NetWare server.