Xerox 2101, Configuration Manual

Page: 34 / 192

2
2-10 Setting up Network Servers
You do not need to rerun Setup when you add or remove a NetWare queue; however,
you should restart the Fiery EX2101 after you create or remove a queue.
When the Fiery EX2101 is configured to connect to a NetWare server, it polls the
NetWare server for jobs in each of its queues. If jobs are found, they are automatically
transferred over the network to the matching connection on the Fiery EX2101.
For example, jobs from the NetWare queue with the
_print extension are sent to the
Fiery EX2101 Print queue. While a job is processed and printed, a record of the job is
being created. You can access the Job Log containing these records at any time.
Configuring a NetWare server for printing
The following sections explain how to set up a NetWare file server so networked users
can print to the Fiery EX2101 from their workstations, and the Fiery EX2101 can
obtain print jobs from the NetWare server.
For each NetWare file server that you configure, follow these general steps. More detail
is provided in subsequent sections and in your NetWare documentation.
• Make sure the server is connected to a functioning IPX network.
• Log in as the Supervisor on a PC connected to the NetWare file server.
• For NetWare installations, set up an NDS connection (see “Setting up an NDS
connection” on page 2-12).
• For NetWare in emulation mode, set the bindery context (see “Setting the NetWare
bindery context” on page 2-12).
• For NetWare in bindery emulation, set up a file server, print server, and Print queue
for the Fiery EX2101 (see “Setting up a NetWare Print queue for bindery” on
page 2-13).