Introduction
Chilli Dimmer 73-853-00 Issue 8
Page 3 of 30
Introduction
Dimmer
Version
Breakers
Residual Current
Device (RCD)
Mains Supply
Temperature
Monitoring
Pro 4 x 10
Neutral Disconnect
-
Single Phase Only
-
Pro 4 x 10 HF
Neutral Disconnect
-
Single Phase Only
-
12 x 10
Single Pole
Option
Three Phase (see note)
Yes
Pro 12 x 10
Neutral Disconnect
Option
Three Phase (see note)
Yes
Pro 12 x 10 HF
Neutral Disconnect
-
Three Phase
-
12 x 16
Single Pole
Option
Three Phase (see note)
Yes
Pro 12 x 16
Neutral Disconnect
Option
Three Phase (see note)
Yes
24 x 10
Single Pole
Option
Three Phase (see note)
Yes
Pro 24 x 10
Neutral Disconnect
Option
Three Phase (see note)
Yes
Pro 24 x 16
Neutral Disconnect
-
Three Phase (see note)
Yes
Pro 6 x 25
Neutral Disconnect
Option
Three Phase
Yes
Table 1: Chilli Dimmer Variants
Note - Single Phase Conversion
Additional information detailing how to convert these dimmers for single phase operation is given in a separate
document TU7806 available for download from the Zero 88 website.
This Manual
This manual describes the operation of the Chilli
Dimmer. It is written for dimmers with the new white
backlit user interface (see figure 1 - 1) running
version 7.00 firmware onwards. For older dimmers
with the green backlit user interface, please refer to
the Issue 7 manual supplied with the dimmer.
This chapter contains a general overview of the unit
followed by a brief description of the front panel
controls and displays.
The Installation chapter provides information on
installing the dimmer and connecting up the mains,
loads, DMX, Chilli network and alarm input.
The User Interface chapter describes all the various
functions of the dimmer which can be set up and
operated via the front panel controls.
The manual concludes with a chapter on the
technical specification of the dimmer.
Conventions
Throughout this manual the following conventions
are used.
References to front panel controls, appear in capital
letters, for example:
ENT key, ESC key.
References to the LCD screen on the control panel
are shown as follows:
DMX: 1
Temp: OK
References to fields which appear on the LCD
screen are shown in italics, for example:
Manual Control, Set Chan Level etc.
