User Interface
Chilli Dimmer 73-853-00 Issue 8
Page 28 of 30
Unlocking the Dimmer
If the dimmer is locked, the main
screen will be shown, and all
menu access will be disabled.
If the ENT key is pushed in order
to gain access to the menus, the
screen shows:
Dimmer Locked
Code: xxxx
Enter the 4 digit code using the
numeric keypad, and then press
the ENT key.
If the correct code is entered - the
dimmer is unlocked, and the
screen shows the first screen in
the top level menu structure
(Manual Control).
If an incorrect code is entered - an
error message is briefly shown
and the screen returns to the main
screen.
Note - Unlocking the Dimmer
If the code to unlock the dimmer
has been forgotten, contact Zero
88 Technical Support who will
supply a master unlock code.
Chilli Net
This option puts the dimmer into
Network Mode
so that it can be
controlled remotely by a Chilli
Master Controller, Chilli Control
Panels or other Chilli Dimmers on
the
network
via
Chilli
Net
messages.
For the network to function
correctly each dimmer on the
network must have a unique
dimmer number.
Select the
Chilli Net
option from
the top level options menu, and
press the ENT key. The screen
shows:
State: Disabled
Dimmer No: xxx
The cursor is in the
State
field.
Use the cursor keys to select
Enabled. Press the ENT key to
move the cursor to the
Dimmer No
field:
State: Enabled
Dimmer No: xxx
Enter the dimmer number using
the numeric keypad or cursor
keys. Press the ENT key to
confirm.
The dimmer number is checked
against other dimmers on the
network. The screen shows:
Verifying
Dimmer No
If the dimmer number is valid, the
screen will briefly show:
Dimmer No
Accepted
If the dimmer number is already
used on the network, the screen
will briefly show:
Dimmer No
Already Used
Area Control
This option is only available when
the dimmer is in
Network Mode
.
This option allows you to assign
each of the dimmer channels to
an Area (1 - 10).
Select the
Area Control
option
from the top level menu options,
and press the ENT key to enter
the Area Control menu.
The
following
options
are
available:
• Set Chan Area
• Set All Chans
Set Channel Area
This option allows you to assign
an area to each of the dimmer
channels individually.
Select the
Set Chan Area
option
from the menu, and press the
ENT key. The screen shows:
Channel: 1
Area: 1
The cursor is in the
Channel
field.
Press the ENT key to move
between the
Channel
and
Area
fields, and adjust the values using
the cursor keys and numeric
keypad.
Repeat
operation
for
each
channel.
Set All Channels
This option allows you to assign
an area to all the channels on the
dimmer in a single operation.
Select the
Set All Chans
option
from the menu, and press the
ENT key. The screen shows:
All Channels
Area: 1
Use the numeric keypad or cursor
keys to enter the required area
number (1-10) and then press the
ENT key.
