User Interface
Chilli Dimmer 73-853-00 Issue 8
Page 23 of 30
Playback Sequence
Stand Alone Mode
- This option
allows you to playback any of the
three programmed sequences,
and start and stop sequences
running. Only one sequence can
be running at a time.
Select the
Playback Sequence
option from the Sequences menu,
and press the ENT key. If there is
no sequence currently running in
the dimmer, the screen shows:
Sequence: 1
ENT to start
If sequence X is currently running
in the dimmer, the screen shows:
Sequence: X
ENT to stop
Use the cursor keys to select the
required sequence.
The second line of the screen
shows the current state of the
selected sequence.
Starting a Sequence
Select the required sequence
using the cursor keys, then press
the ENT key.
The sequence will start running
and replace any memory or
sequence which was previously
being output.
Stopping a Sequence
Select the sequence that is
currently running in the dimmer
using the cursor keys, then press
the ENT key.
The sequence will stop running.
Playback Sequence
Network Mode
- This option
allows you to playback any of the
three programmed sequences,
and start and stop sequences
running. Only one sequence can
be running at a time.
Select the
Playback Sequence
option from the Sequences menu,
and press the ENT key. If there is
no sequence currently running in
the dimmer, the screen shows:
Sequence: 1
ENT to start
If sequence X is currently running
in the dimmer, the screen shows:
Sequence: X
ENT to stop
Use the cursor keys to select the
required sequence.
The second line of the screen
shows the current state of the
selected sequence.
Starting a Sequence
Select the required sequence
using the cursor keys, then press
the ENT key.
The sequence will start running.
The dimmer sends out a start
sequence message onto the
network, and then play memory /
area messages at the appropriate
times.
Starting a sequence in an area will
replace any memory or sequence
for that area currently being output
by the dimmer.
Stopping a Sequence
Select the sequence that is
currently running in the dimmer
using the cursor keys, then press
the ENT key.
The sequence will stop running.
The dimmer sends out a stop
sequence message onto the
network.
Sequence Options
This option allows you to adjust
the crossfade and dwell times for
the sequences in the dimmer.
These times are global and apply
to all three sequences in the
dimmer.
Select the
Sequence Options
option from the Sequences menu,
and press the ENT key, the
screen shows:
X-Fade Time: xx
Dwell Time: xxx
The cursor appears in the
X-Fade
Time
field. Use the numeric
keypad or cursor keys to adjust
the fade time as required (range 1
- 60 seconds).
Press the ENT key to confirm the
crossfade time. The cursor moves
to the
Dwell Time
field.
Use the numeric keypad or cursor
keys to adjust the dwell time as
required (range 1 - 600 seconds).
Press the ENT key to confirm the
dwell time. The cursor moves to
the
X-Fade Time
field.
Clear Sequence
This option allows you to clear any
of the sequences in the dimmer.
Select the
Clear Sequence
option
from the Sequences menu, and
press the ENT key, the screen
shows:
Select
Sequence: 1
Use the numeric keypad or cursor
keys to select the required
sequence, then press the ENT
key, the screen shows:
Push ENT key to
clear sequence
Press the ENT key. The screen
returns to the
Clear Sequence
screen.
