Xeo4 RILHEVA II, User Manual

Page: 5 / 35

5
GENERAL DESCRIPTION
•
Rilheva platform is an innovative solution that gathers all your hardware data and transmits
them to a control and monitoring server, through a platform integrating hardware, software
and services.
•
Rilheva II is an electronic device able to capture data through the serial ports RS232, RS485 and
Ethernet using ModBus RTU / Modus TCP protocol and send them, via GPRS/3G modem or
xDSL line, to Xeo4 Cloud servers. Here your data are stored, processed and made available to
the authorized users by using a common internet browser or a smartphone app.
•
This way, Rilheva II allows to monitor and control your remote sites without the necessity to
build your own control center .
•
The user has only to browse the internet, access to www.rilheva.it portal and authenticate
himself in order to monitor and control all the data available on the remote site, in the same
way as he was there.
•
The Rilheva II device implements internally the master Modbus protocol, able to query up to 31
slave devices with a polling frequency up to 1 second. The device analyzes the received data
(with a maximum of about 1000 variables) and send them to the Xeo4 servers. This can be
done on a polling basis (user settable) or instantaneously when alert events are triggered.
•
All the data and parameters are made available online through the Rilheva portal, where it is
possible:
Configure the registers for every slave device
View all the registers in real time
View or extract historical data, trends, diagrams, analytical and summary reports
Set the value for a register parameter (output, set-point)
Build a standard configuration template (model) to be reloaded in the future
Access the diagnostics section to investigate any communication issue