Xeo4 RILHEVA II, User Manual

Page: 17 / 35

17
PROCEDURE FOR FIRMVARE VERSION RIL2_6.0.0 OR GREATER
In order to configure the connection parameters of the Rilheva device, please proceed as follows:
1) Connect the ETH0 port of the device to a PC, using a direct Ethernet cable (UTP5 patch).
2) On the PC, configure a static IPv4 address within the subnet 192.168.44.x (e.g. 192.168.44.10) and a
subnet mask 255.255.255.0.
3) Open your internet browser and point to the following address: http://192.168.44.1
The authentication credentials are pre-configured as follows:
username: admin
password: <Rilheva MAC address, no colon, lowercase >
The MAC address of the Rilheva device is printed on a tag both inside the box and on one side of the
Rilheva (
MACETH0). See following picture.