Xeo4 RILHEVA II, User Manual

Page: 16 / 35

16
DEVICE CONFIGURATION VIA WEB INTERFACE
The configuration procedure varies slightly depending on the firmware version.
In order to verify which firmware version is installed on the device go to http://www.rilheva.it, select the
device in the tree menu on the left. Then, in the device summary page, click on the gear icon and select the
"Advanced" tab.
PROCEDURE FOR FIRMVARE VERSION UNTIL RIL2_5.9.9
In order to configure the connection parameters of the Rilheva device, please proceed as follows:
1) Connect the ETH0 port of the device to a PC, using a direct Ethernet cable (UTP5 patch).
2) On the PC, configure a static IPv4 address within the subnet 192.168.1.x (e.g. 192.168.1.10) and a
subnet mask 255.255.255.0.
3) Open your internet browser and point to the following address: http://192.168.1.1