Xeo4 RILHEVA II, User Manual

Page: 20 / 35

20
CONFIGURATION PAGE
This screen allows to configure the main settings required to perform the startup of the Rilheva device.
It is possible to assign different IP addresses to the two LAN ports (eth0 and eth1). The eth0 port can be
configured either for the automatic acquisition of an IP address (via DHCP) or statically.
In the GPRS/3G section the APN parameter can be defined depending on the GSM operator chosen, and
username/password (only if required, otherwise leave the field empty).
Using the “Wan interface” setting, it is possible to choose the way the device will connect to the Internet,
and so to the Rilheva Cloud system.
By choosing “LAN eth0” choice, the device will use the parameters of this section in order to connect to the
Internet. On the other hand, by choosing “GPRS/3G” the device will use the installed SIM card to connect to
the mobile network.