XS26GS Managed Optical Ethernet Switch User Manual
78
Parameters
type
type
: type is in the range from 1 to 7.
1:Broadcast
2:Multicast
3:Destination Lookup Failed(DLF)
4:BrMulticast
5:BrDLF
6:MuDLF
7:BrMuDLF
rate
rate
: rate is in the range from 1 to 262143.
Description
Use
storm-control
command to set the upper threshold of the
broadcast/multicast/DLF (Destination Lookup Failed) traffic received on the port.
Use
no storm-control
command to remove the threshold configuration.
With the traffic upper threshold specified on a port, the system periodically collects
statistics of the broadcast/multicast/DLF traffic on the port. Once a type of traffic
exceeds the specified upper threshold, it blocks this type of traffic on the port.
Examples
XS#
storm-control type
2
rate
2000
Configuration completed successfully.
3.9
Link Aggregation Commands
The “Any view” in the below table refers to any one of the following: System view,
Ethernet port view, Port-based VLAN view, VLAN view, or dot1x view.
Command list
:
View
Command
Any view
show lacp system-id
Any view
show lacp mode
Any view
show link-aggregation interface ethernet
interface
[ to ethernet
interface
]
Any view
show link-aggregation summary
Any view
show link-aggregation verbose
agg-id
System view
Ethernet port view
lacp
no lacp
System view
lacp system-priority
system-priority
no lacp system-priority
System view
link-aggregation group
agg-id
description
agg-name
no link-aggregation group
agg-id
description
System view
link-aggregation group
agg-id
mode { manual |
static }
no link-aggregation group
agg-id
Ethernet port view
lacp port-priority
port-priority
no lacp port-priority
Ethernet port view
link-aggregation group
agg-id
no link-aggregation group
show lacp system-id