XS26GS Managed Optical Ethernet Switch User Manual
57
Mst-regio
n view
From system view, enter
the
spanning-tree
mst-region
view command
XS(mst-region)#
To exit to System
view, enter the
end
command, or
press
Ctrl-Z
Ip-bindin
g view
From system view, enter
the
ip-binding
view
command
XS(ip-binding)#
To exit to System
view, enter the
end
command, or
press
Ctrl-Z
3.5
Global Commands
The “Any view” in the below table refers to any one of the following: System view,
Ethernet port view, Port-based VLAN view, VLAN view, or dot1x view.
Command list
:
View
Command
Explanation
Any view
help
shows all available commands on current view.
clear
clears screen display.
save
saves current configuration.
reboot
reboots the switch.
exit
Logs out and disconnects from the switch.
3.6
User Level
There are three user levels: Visitor, User, and Admin. The default users are listed in the
following table:
Username
Password
User level
guest
Visitor
manager 123
User
superuser 123
Admin
The three levels of users have different access privileges as shown on the following
table:
User level
Explanation
Visitor
CAN access the following commands:
clear
disable
enable
exit
help
ping -----
show (note)
note: CAN NOT access the following commands:
show user
show snmp community
show snmp traps-host
show snmp user
User
CAN NOT access the following commands:
