![background image](http://html1.mh-extra.com/html/xenya/xs26gs/xs26gs_user-manual_3274837137.webp)
XS26GS Managed Optical Ethernet Switch User Manual
132
None.
Description
Use
dot1x
command to enable 802.1x for the specified Ethernet port.
Use
no dot1x
command to disable 802.1x for the specified Ethernet port.
Examples
XS(Ethernet0/1)#
dot1x
802.1x is enabled on port ethernet0/1
dot1x re-authentication
Syntax
dot1x re-authentication
no dot1x re-authentication
View
Ethernet port view
Parameters
None.
Description
Use
dot1x re-authentication
command to enable 802.1x re-authentication for
the specified Ethernet port.
Use
no dot1x
command to disable 802.1x re-authentication for the specified
Ethernet port.
Examples
XS(Ethernet0/1)#
dot1x re-authentication
The configuration succeeds.
dot1x port-control
Syntax
dot1x port-control { auto | forceauthorized | forceunauthorized }
View
Ethernet port view
Parameters
auto
: specified to operate in
auto
access control mode. When a port operates in
this mode, all the unauthenticated hosts connected to it are unauthorized. In this
case, only EAPoL packets can be exchanged between the switch and the hosts. After
passing the authentication, the hosts connected to the port are authorized to access
the network resources. Normally, a port operates in this mode.
forceauthorized
: specified to operate in
forceauthorized
access control mode.
When a port operates in this mode, all the hosts connected to it can access the