XS26GS Managed Optical Ethernet Switch User Manual
158
Clear all the logs that were saved in the system.
Examples
XS# no log
Clear all the logs successfully!
3.22
LLDP Configuration Commands
The “Any view” in the below table refers to anyone of the following: System view,
Ethernet port view, Port-based VLAN view, VLAN view, or dot1x view.
Command list
:
View
command
System view
Ethernet port view
lldp
no lldp
System view
lldp admin-status { disable| rx| tx| rxtx }
Ethernet port view
lldp encapsulation { snap| Ethernet-ii }
System view
lldp timer tx-interval
interval
System view
lldp hold-multiplier
value
System view
lldp timer tx-delay
delay
System view
lldp fast-count
count
System view
lldp timer reinit-delay
timer
System view
lldp tlv-enable basic-tlv { all | system-capability |
system-description | system-name |
port-description |
management-address
}
no lldp tlv-enable basic-tlv { all | system-capability
| system-description | system-name |
port-description |
management-address
}
Any view
show lldp neighbor-information
Any view
show lldp statistics
Any view
show lldp status
Any view
show lldp tlv-config
lldp
Syntax
lldp
no
lldp
View
System view or Ethernet port view
Parameters
None
Description
It is used to enable or disable the global LLDP or port LLDP. If you want to enable
port LLDP, you need to enable the global LLDP first. By default, LLDP is disabled
globally; but when the global LLDP is enabled, the port LLDP is enabled by default.
