XS26GS Managed Optical Ethernet Switch User Manual
129
XS(dot1x)#
end
XS#
max-req
Syntax
max-req
max-retry-value
View
dot1x view
Parameters
max-retry-value
: Maximum number of times that a switch sends authentication
request packets to a user. This argument ranges from 1 to 10.
Description
By default, a switch sends authentication request packets to a user for up to 2
times.
After a switch sends an authentication request packet to a user, it will send another
authentication request packet if it has not received response from the user after a
specific period of time. If the switch still receives no response when the configured
maximum number of authentication request transmission attempts is reached, it
stops sending requests to the user. This command applies to all ports.
Examples
XS(dot1x)#
max-req
5
Max request count is 5.
timeout
Syntax
timeout { quiet-period
quiet-period-value
|
reauth-period
reauth-period-value
|
server
server-timeout-value
|
supplicant
supp-timeout-value
|
tx-period
tx-period-value
}
no
timeout { quiet-period
quiet-period-value
|
reauth-period
reauth-period-value
|
server
server-timeout-value
|
supplicant
supp-timeout-value
|
tx-period
tx-period-value
}
View
dot1x view
Parameters
quiet-period
quiet-period-value
: sets the quiet-period timer. This timer sets the
quiet-period. When a supplicant system fails to pass the authentication, the switch
quiets for the set period (set by the quiet-period timer) before it processes another
authentication request re-initiated by the supplicant system. During this quiet
period, the switch does not perform any 802.1x authentication-related actions for
the supplicant system.
The
quiet-period-value
argument ranges from 1 to 65535 (in seconds). By default,
