11
it when the
INPUT
LED remains off. This fingerprint placement process must be
repeated up to five times to ensure an accurate reading. If a fingerprint profile
is accepted, a unique user ID will be generated and the
ACCEPT
LED will flash
out that user’s ID (Valid IDs are numbered 1-30, where the Master User ID is
always the number 1). If the fingerprint profile is not accepted, the
ERROR
LED will flash.
NOTE: Optionally, users can fill in this information to ID /
Fingerprint User table at the back of this manual.
4. If finished with the batch of fingerprint additions, perform
i-touch™ / Auto-
closer™
synchronization procedure.
Add A Temporary Fingerprint
(Requires Master User Authorization)
A Temporary Fingerprint is set to expire after a user specified number of days.
To input a temporary fingerprint:
1.
Press the
FUNC
key, then the
7/TEMPORARY
key, followed by the
1/
ADD PRINT
key.
2.
Input MF, or MC and the
ENTER
key. If the MF or MC is accepted, the
ACCEPT
LED will flash. If the
ACCEPT
LED did not flash, it either means
the Master User wasn’t recognized or that the maximum number of finger-
prints have already been added, and the
ERROR
LED will flash.
3. The
INPUT
LED should be flashing. The new user should place their fin-
ger on the sensor and remove it when the
INPUT
LED stops flashing.
This fingerprint placement process must be repeated up to five times to
ensure an accurate reading.
4.
After the fingerprint has been accepted, the
INPUT
LED should be lit
solid. Enter the number of active days (max 30 days), followed by the
EN-
TER
key. The temporary fingerprint will expire in the number of active
days (+/- two hours).
5. If the temporary fingerprint addition was successful, the
ACCEPT
LED will
flash. If the
ERROR
LED flashes, an incorrect number of days was input.
6. If finished with the batch of fingerprint additions, perform
i-touch™ /
Autocloser™
synchronization procedure.
NOTE: Optionally, users can ID their Temporary Fingerprint and
fill in this information to ID / Fingerprint User table at the back of
this manual.
Instructions
