Xantrex XW4024 230 50, Installation Manual, Page: 42 / 68

Inverter/Charger Installation
2–24 975-0384-01-02
This manual for use by qualified personnel only
To connect the inverter to the main utility panel:
1. See Figure 2-14. Connect the neutral wire from the main utility panel to the
inverter GRID (AC1) neutral terminal.
2. Connect the AC LIVE wire from the main utility panel to the inverter GRID
(AC1) L terminal.
To connect the inverter to the AC generator:
1. See Figure 2-15. Connect the neutral wire from the generator breaker or
disconnect to the inverter GEN (AC2) neutral terminal.
2. Connect the AC LIVE wire from the generator breaker or disconnect to the
inverter GEN (AC2) L terminal.
Figure 2-14 Wiring the Xantrex XW Inverter/Charger to the Inverter Load Sub-Panel and Utility Grid
LIVE OUT
N
G
LIVE
IN
_AC Wiring (all)-EU.vsd/AC Wiring to SubPanel /April 10, 2008
© 2007 Xantrex Technology Inc .
G
N
AC
LOAD
GRID
(AC1)
GEN
(AC2)
AC
OUT
AC IN AC IN
L
N
L N
L
N
Hybrid Inverter /Charger
L N
AC
LOAD
GRID
(AC1)
GEN
(AC2)
AC OUT AC IN AC IN
L N L N
_AC Wiring-to-subpanel-EU.vsd May 3, 2010
Inverter Load
Sub-Panel (230 V)
AC
Neutral
AC LIVE
Groun
Primary System Ground
Main Utility Panel
230 V
Torque all inverter terminal block connections
according to Table 2-4 on page 2–13.
Actual wiring and grounding requirements may vary.
The Neutral-to-Ground bond, which
is provided in the utility grid system,
may be located upstream.