Xantrex XW4024 230 50, Installation Manual, Page: 14 / 68

Introduction
1–4 975-0384-01-02
This manual for use by qualified personnel only
System Components and Accessories
Xantrex XW Inverter/Charger
The Xantrex XW Inverter/Charger is a modular “building block” sine-wave
inverter/charger that can be used for both residential and commercial
stand-alone, grid-backup, and grid-tie applications with battery energy storage.
The Xantrex XW Series Inverter/Charger is a self-contained DC to AC inverter,
battery charger, and AC transfer switch.
Up to four inverters can be installed in parallel to create larger 230-volt,
single-phase systems, allowing for increased capacity. Multiple Xantrex XW
Inverter/Chargers can also be connected to create a three-phase system. One
inverter per phase is required, and up to two inverters can be connected in
parallel on each phase.
A Battery Temperature Sensor (Part Number 808-0232-02) is included with the
Xantrex XW Inverter/Charger. The Battery Temperature Sensor monitors the
temperature of the battery bank and adjusts the charging accordingly. For
installation instructions, see page 2–18.
Figure 1-3 Xantrex XW Inverter/Charger