Xantrex XW4024 230 50, Installation Manual, Page: 28 / 68

Inverter/Charger Installation
2–10 975-0384-01-02
This manual for use by qualified personnel only
Network Layout
Each device on the network is linked with separate lengths of Xantrex Xanbus
cable, as shown in Figure 2-7.
Two terminators are required to ensure the communication signal quality on the
network. The Xantrex Xanbus-enabled devices at each end of the chain must
have a terminator inserted into their open network ports.
CAUTION: Unpredictable device behavior
Do not connect one end of the network to the other to make a ring.
Figure 2-7 Xantrex Xanbus Network Layout
System Control Panel II
Solar Charge Controller
Enter Exit
System Control Panel
Charge
Controller
Automatic Generator Start
Hybrid Inverter / Charger
Gri d (AC1)
Gen (AC2)
Faul t /
Warni ng
Equal i ze
Battery
Chargi ng
Inverti ng
Flashing =sell
Inverter/Charger
Terminate the network at each end.