Xantrex XTR 850 Watt, Operating Manual

Page: 104 / 286

Analog Programming (APG) and Isolated Analog Programming (ISOL)
4-12 M370046-01
Voltage-Controlled Current APG Setup
Activating APG Current Mode
To activate APG current mode using an external voltage source:
1. Turn the 9-position mode control to the CAP position or press the
rotary Adjust/Enter control if the mode control is already at the CAP
position.
CAPr is displayed on the output voltage display.
2. Turn the rotary Adjust/Enter control to select source Un1S (Voltage
source from non-isolated connector).
3. Press the rotary Adjust/Enter control to commit the selected mode.
LE C is displayed on the output voltage display.
4. Select the input source level using the rotary Adjust/Enter control.
5. Once the desired level has been selected, press the rotary Adjust/
Enter control to commit the change.
The display will return to the normal display.
Deactivating APG Current Mode
To deactivate the APG current mode:
1. Turn the 9-position mode control to the CAP position or press the
rotary Adjust/Enter control if the mode control is already at the CAP
position.
2. CAPr is displayed on the output voltage display.
3. Turn the rotary Adjust/Enter control to select nonE .
4. Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.