Page: 44
SmartPad LCD
¥
© 2006 Xantech Corporation
Section 5: Advanced Programming
RC68+ IR CODE TRIGGERED SEQUENCER
The SmartPad LCD™ Touch Screen Controller can generate IR code (and/or RS232) sequences triggered by
single RC68+ command received at the CSPLCD’s IR Receiver (
Figure 2 – 2
). This feature can be useful in
eliminating long sequence execution from hand-held controllers and also allow a wider range of programmable
remotes that can be used with the CSPLCD (i.e. Remotes that do not allow sequence programming).
When the CSPLCD Touch Screen receives certain RC68+ commands (Default Code Group C9), via its IR
sensor or an external IR sensor, the system will output a sequence of IR commands. The sequence can be any
combination of IR Commands, Internal CSPLCD Controller Commands, and
RS232
commands. This means a
basic programmable remote can trigger any command (IR or RS232) to communicate with all devices
connected to the CSPLCD. A total of 55 Macro’s can be triggered in this fashion.
Figure 27
–RC68 IR Code Triggered Sequencer
