Model 590-10
Page 11
© 2002 Xantech Corporation
14. On pop-up (CCF Importer), type in Brand Name and Component Name (e.g., RCA and DSS).
15. Double click on desired component type on list of converted files on left side of pop-up (e.g., DSS.cnv). An
asterisk (*) will appear just to the left. Click Import.
16. Click OK for addition to Brand List (if shown) and OK for addition (or merge) to a .bci file.
This completes the file import to the Brand and .bci files in DRAG460.
17. At this point, or at any later date, you can choose additional component types from the CCF file (e.g., DVD,
etc., if listed) by using the CCF Importer again. Simply click Import CCF from the File menu, double click on
desired folder and repeat steps 13 to 16 as necessary.
PROGRAMMING THE 590-10
SELECT BASE UNIT
With the system operating and the Dragon Drop-IR open proceed as follows:
1. Choose “NEW PROJECT” from the File menu. (Choose Open Project to modify an existing project file).
2. In the New Project window, type a file name such as “joneshome” and click “SAVE”. The proper file extension
is added automatically.
3. From the Base Unit menu, select “590-10”.
4. A graphic window (590-10) with 16 virtual switch pairs and a Command List will appear (
Figure 13
).
NOTE:
Clicking the “OPTIONS” button will open a window that shows the configuration of the internal jumper
settings for switching to +12V or Ground and Momentary or Toggle as described in section “Hardware
Connections/Inputs”. This window is for reference only. The actual jumper changes must be done manually by
taking the 590-10 apart.
Figure 13 – 590-10 Base Unit
