Page 12
Model 590-10
© 2002 Xantech Corporation
Figure 14 – 590-10 Base Options Window
Selecting Palettes
a) From the “PALETTE” menu, click “SELECT IR COMMAND PALETTE”. (F4)
A list of palettes file names appears to the right with Select Palette in the title bar.
b) Scroll the list (if necessary) and click on the filename for each palette of the components to be controlled. (e.g.
pioneercd.pal, rcadss.pal, etc).
As each file name is selected, the palettes will appear side-by-side, left to right, with the filename in each title
bar.
NOTE 1:
The various palettes and window boxes can be moved and sized (except the virtual keypads) for
ease of use.
NOTE 2:
Each palette can be edited by clicking the Edit Palette bar or closed with the X button in the title bar.
PROGRAMMING IR COMMANDS AND SEQUENCES
Associating IR Commands with Switch Terminals
1. Select a switch in the virtual 590-10 window. It will be highlighted in a blue outline.
2. In the appropriate palette, click on the command to be sent by the 590-10.
3. The code name (function/brand/component) for that switch will appear in the Command List.
4. To remove a code from the command list, right click on the code, it will disappear, showing that it has been
erased.
5. Repeat steps 1-4 as needed.
5. Move ‘Write/Protect’ switch to ‘Write’ position.
6. From the File menu, select Base Unit Transfer. The project should be transferred to the 590-10. If project
does not transfer, check connections,
Figure 1
, and Com Port connection in ‘Preferences’. Try Base Unit
Transfer again. Project should transfer.
7. Move ‘Write/Protect’ switch to ‘Protect’ position.