XAG P30, Maintenance Manual, Page: 7 / 56

7
Use only XAG approved propellers with your
P30 2019. There are two types of propeller,
CW and CCW as indicated on the Propellers as
figure below.
Propellers
Use a 3.0 screwdriver to remove the 4 screws on the
fastening paddle clamp, then remove the propeller
for replacement.
The screws using M4*12*8 Hexagon socket
combination screw here.
• Motor 1 , & Motor 3 : CCW
• Motor 2 , & Motor 4 : CW
②
L
①
③ ④
R
FRONT
REAR
P30 2018/2019 Propeller-CW *2 SKU-02-006-00070
P30 2018/2019 Propeller-CCW *2 SKU-02-006-00071
M4*12*8 Hexagon socket combination screw *8 SKU-02-004-00227
💡
What do we need in this section:
Reassemble the propeller back in place and tighten
the 4 screws on the propeller clamp.
🛠
🔧
Disassemble:
Assemble:
@2020 XAG Australia All Rights Reserved