41
Flight Controller (FC)
P20/P30 2019 Flight Controller (FC)
*1
SKU-05-002-00595
M3*8*6 Hexagon socket combination screw
*6
SKU-02-004-00223
💡
What do we need in this section:
•
Remove the Airframe Hood, then disconnect the connectors for the Flight Controller. Use
a 2.5 screwdriver to remove the four (4) screws securing the FC and remove the FC Module
for replacement.
The screws using M3*8*6 Hexagon socket combination screw here.
🔧
Disassemble:
1.
Pass the Flight Controller feeder through the front fuselage Strengthener, and replace
the Flight Controller back into the original position and secure the components with
screws.
2.
Reconnect the Flight Controller connectors (Refer to the connection guide in the
interior of the Airframe Hood)and reorganize the feeder with cable tie and reassemble
the Airframe Hood.
🛠
Assemble:
I.
Ensure the Flight controller is installed horizontally and secured.
II.
Before reassembly, ensure there are no foreign objects under the Flight Controller and
the reassembly area.
III.
Ensure all unused connectors are covered with waterproof rubber plug.
IMPORTANT:
•
After the assembly is completed, inspect and ensure there are no loose or missing screws,
and ensure the cables are connected correctly.
🔎
CHECK :
@2020 XAG Australia All Rights Reserved