47
XAG AUSTRALIA
Hover:
Press the Hover Button to command the
RPA to Hover
Switch Mode:
Press and Hold the Hover Button
to switch Mode. The ACS2 Remote
Controller will exit Manual Control and re-
enter Autonomous Mode, the Controller
will also broadcast Autonomous Mode
Broadcast:
Press the Speed Broadcast Button once
to broadcast the current Speed
Increase Rate:
Press the Speed + Button to increase the
Flight Speed by 0.5m/s
Decrease Rate:
Press the Speed - Button to decrease
the Flight Speed by 0.5m/s
The Maximum Flight speed of the RPA with Obstacle detection is
0.5m – 6.0m/s
🧷
IMPORTANT
Move the RPA Forward
Move the RPA Backward
Move the RPA Sideway to the Left
Move the RPA Sideway to the Right
Rotate the RPA Counter-Clockwise (CCW)
Rotate the RPA Clockwise (CW)
During Autonomous Mode, Manual Mode can be activated by pressing any of the Motion Control
Button. The Control Status Indicator (4th Indictor) will turn Green indicating it is in Manual Mode, and
Aircraft Arm Status Status Indicator will flash Green twice.
🧷
IMPORTANT
•
Motion Control
•
Hover / Switch Mode
•
Speed Control
